Hollow Core Insulator Market: Introduction
An Insulator is a material which is used to keep sound or heat contained, or something which does not conduct electricity. Hollow core insulators are insulating substances for various high voltage applications and electrical power transmission lines. Hollow core insulators, alternatives for glass and porcelain insulators, provide high quality, reliable and strong performance in high voltages up to 1100 kV AC and 1100 kV DC.
As compared to glass and porcelain insulators, hollow core insulators offer other significant benefits such as lighter weight, better contamination performance, seismic resistance and increased protection while in a catastrophic failure. Hollow Core Insulators comprise of three major components: Flanges, Fibre Reinforced Plastic rod, and sheds. Hollow core insulators provide dimensional consistency which allow for improvements in dielectric optimization and better performance of various seal systems.
The need of hollow core insulators has increased in the wake of protecting transformers and power transmission lines, due to the hydrophobicity of its sheds which therefore provide improved performance under challenging environmental and polluted conditions.
To remain ‘ahead’ of your competitors, request for a sample @
https://www.persistencemarketresearch.com/samples/32363
Hollow Core Insulator Market: Dynamics
As per the EIA, global electricity consumption is expected to grow at a higher rate than the population, hence leading to the per capita electricity consumption. The power transmission and distribution sector has been witnessing a spike in intermittent cut-offs in power supply involving scheduled load shedding to abrupt terminations for the consumers. This phenomenon can be due to wiring failures or short circuits in the power transmission lines, which could also be harmful for residents nearby. Hollow core insulators ensure that an electrical conductor has safe passage through a conducting barrier without causing issues such as making electrical contact with it.
One main application of hollow core insulators involves switchgears, in which hollow core insulators offer tight dimensional insulating, flexibility and short design cycle time, essential to the rise in demand for the hollow core insulator. The growth of hollow core insulators market can also be attributed towards consumers’ preference towards safer and high performance and power equipment.
As mentioned above, due to the advantages hollow core insulators provide over glass and porcelain insulators, the hollow core insulator market continues to grow. Hollow core insulators also find immense applications in ultra and extra high voltage apparatuses, thereby creating a positive prospects for the upward trend of the market.
Materials required to manufacture hollow core insulators have stringent mechanical characteristics such as the ability to handle high stresses, weight and pull of the terminals, attraction between poles while short circuits, and more importantly earthquake stresses.
Flanges used in the hollow core insulators are generally attached via an epoxy bond. These epoxy bonds have an upper temperature limit of 105°C. Therefore, the high manufacturing cost, as inadequate designs can compromise the flange bond and can lead to failure. The cost of hollow core insulators are also higher than that of normal glass or porcelain insulators. Like any pressurized vessel, the hollow core insulator is also subject to leakage. These factors might create hindrance for the market growth during the forecast period. However, since it plays an essential role in the power generation and the electrical industry, the demand for hollow core insulators is expected to witness significant surge over the coming years.
This objective is also being addressed via continued cost – effective product innovation and development by the hollow core insulator manufacturers, such as attaching gas monitoring systems such as manometers to it. The integration of smart features into hollow core insulators, by which the software can predict the time vs pressure relationship, determining rates of loss after catastrophic events. This can help manufacturers innovate the hollow core insulator to be well equipped in similar times.
For critical insights on this market, request for methodology here @ https://www.persistencemarketresearch.com/methodology/32363
Hollow Core Insulator Market: Segmentation
On the basis of product type, the global Hollow Core Insulator market can be segmented into the following:
- Composite
- Ceramic
On the basis of application type, the glow Blow – off valves market can be segmented into the following:
- Instrument Transformer
- Circuit Breaker
- Bushing
- Surge Arrester
- Cable Termination
- Switching Gear
- Station Post
- Current Transformer
- Voltage Transformer
On the basis of shed material type, the global Hollow Core Insulator market can be segmented into the following:
- Liquid Silicone Rubber
- Heat Transfer Vinyl
On the basis of voltage, the global Blow – off valves market can be segmented into the following:
- Below 300 kV
- 300 to 600 kV
- Above 600 kV
Hollow Core Insulator Market: Regional Outlook
In terms of region, South Asia Pacific and East Asia are identified to be prominent markets to create a significant demand in the hollow core insulators market. Developing countries in South Asia and Pacific region such as India and ASEAN are expected to create a high demand due to rising urbanization and increasing disposable income. China ranks highest in the average electrical consumption per capita.
China also has one of the world’s largest power transmission lines for hydroelectric plants, which would require efficient hollow core insulators. Rise in production of electricity via renewable energy sources in European countries will also drive the growth of the hollow core insulator market. Developed countries in North America have high voltage (230 KV to 765kV) transmission lines and more than 15000 transmission lines are also expected to foster the growth of the hollow core insulator market. Middle East and Africa region may also offer lucrative growth opportunities from the mining industry.
For in-depth competitive analysis, buy now@
https://www.persistencemarketresearch.com/checkout/32363
Hollow Core Insulator Market: Key Players
Major market participants in the global Hollow Core Insulator market identified across the value chain include:
- ABB Ltd
- T.E Connectivity
- Lapp Insulators
- Saver S.P.A
- Ceralep
- Shemar Electric Co., Ltd
- Pfisterer SEFAG
- Mascheinfabrik Reinhausen
- PPC Insulators Austria GmbH
- Allied Insulators Group Limited
- ZPE ZAPAL S.A
The Hollow Core Insulator research report presents a comprehensive assessment of the Hollow Core Insulator market and contains thoughtful insights, facts, historical data, and statistically supported and industry-validated market data. It also contains projections using a suitable set of assumptions and methodologies. The Hollow Core Insulator research report provides analysis and information according to market segments, such as geographies, application, and industry.
About us:
Persistence Market Research is here to provide companies a one-stop solution with regards to bettering customer experience. It does engage in gathering appropriate feedback after getting through personalized customer interactions for adding value to customers’ experience by acting as the “missing” link between “customer relationships” and “business outcomes’. The best possible returns are assured therein.
Contact us:
Persistence Market Research
Address – 305 Broadway, 7th Floor, New York City,
NY 10007 United States
U.S. Ph. – +1-646-568-7751
USA-Canada Toll-free – +1 800-961-0353
Sales – sales@persistencemarketresearch.com